top of page

What Is Trenchless Sewer Pipe Repair?

Trenchless sewer repair is exactly what it sounds like: It is a method of sewer repair that allow sewer pipe or sewer lateral replacement without digging a trench.

In many cases, trenchless repair is the preferred method of sewer repair. Because digging a trench is not necessary, the repair is less intrusive, more affordable, and offers a quicker turnaround than traditional, open-trenched sewer repairs.

Trenchless sewer repair uses no-dig construction techniques to fix damaged sewer laterals and water pipes without destroying your entire yard. Pipe Spy has been using trenchless rehabilitation technology for sewer repair work since 1998. We were the first plumbing company to bring this sewer lateral repair technology to the San Francisco Bay Area and East Bay, California.

Trenchless-Sewer-Repair

In the past when a sewer lateral needed to be repaired or replaced, plumbing technicians were required to dig long trenches along the entire length of the pipe. This involved not only removing dirt but also any plant life, landscaping, hardscaping, driveways, and anything else that might be in the way.

That changed with the introduction of trenchless construction technology. This “no-dig” process minimizes disruption using methods like pipe bursting, horizontal directional drilling, and other technologies that optimize our work in underground pipe replacement.

There are great benefits to trenchless digging for pipe repairs: By minimizing or avoiding excavation altogether, money is saved, time is saved, and ecological disturbances are limited. In other words: everyone wins!

How Does Trenchless Sewer Repair Work?

Pipe-Bursting-Animation

While there are several trenchless sewer repair methods and applications used across the nation, at Pipe Spy we use a trenchless sewer repair technique known as Pipe Bursting or Stich Boring. This involves a pneumatic process, where pressurized air helps the device bore along the old pipe. Small pits are used to access the existing pipe. As it goes along the pipe destroying the old pipe, the new pipe is pulled along and installed behind it as it goes. Read our free Pipe Bursting 101 guide to learn more. Visit our YouTube channel to see the pipe bursting repair process in action.

We also hear from prospective customers interested in another trenchless sewer repair method known as Pipe Lining or Slip Lining, or cured-in-place pipe (CIPP). The main problem with this type of sewer pipe replacement is that it decreases the diameter in the pipe size and is not considered a structural repair. CIPP may even take multiple inches off the original lateral’s size, which can contribute to obstruction of flow later on. For this reason, this type of sewer repair rarely gets approved by the jurisdictions where we typically work, including the City of Oakland. Regardless of city approvals, we believe the Pipe Bursting technique is superior since it is longer lasting and often within the same price bracket as CIPP.

Is Trenchless Sewer Repair Environmentally Friendly?

Environmentally-Friendly-Sewer-Repair

In short: Yes!

Trenchless sewer replacement or repair is the most sustainable way to fix plumbing problems. Environmental disruption, waste, and energy use is minimized through the use of this technology.

This is especially true if you work with a plumbing company that believes in being eco-friendly and environmentally responsibly.

Pipe Spy has Green Certification through the California Green Business Network. This certification is shared by other companies that truly value the environment (such as REI, Whole Foods, and Cliff Bar) and gives our customers peace of mind knowing that we uphold the values of resource conservation, pollution prevention, and more.

How Much Does Trenchless Pipe Repair Cost?

The price of trenchless sewer repair depends on factors such as length of pipe, how deep it’s buried, and how many holes need to be dug. The price can be roughly estimated between $4,500 to $12,000 or more. However, it’s important to request an estimate from your prospective sewer repair professional because of the many factors involved in pricing each job.

Another cost to consider is your inspection cost. The sewer camera inspection services at Pipe Spy typically cost $150, including setup, inspection, and cleanup. This fee is also credited toward subsequent sewer lateral replacements.

Many homeowners ask us about the possibility of using homeowner’s insurance to help cover the costs of sewer work. Unfortunately, it’s rare for insurance to cover these costs, but there are certain circumstances when you might get lucky. Read our blog post for more information: Does Home Insurance Cover Sewer Repair?

sewer-grate-cover

More About World Trenchless Day

WTD-Logo

Pipe Spy is excited to join other contractors, engineering firms, public works and more in officially supporting World Trenchless Day.

World Trenchless Day is an annual day of global celebration meant to raise awareness of the many benefits of trenchless technology, including enhancing the safety, economic, environmental, and social factors that surround the sewer industry. We want to help our neighbors understand the important impact trenchless technology has on the local economy and quality of life.

Please follow Pipe Spy on Facebook to learn more.

Комментарии


bottom of page